Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ChronoFlex C® 80A - TPU - AdvanSource Biomaterials

Material Data Center offers the following functions for ChronoFlex C® 80A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Chronoflex C datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Product Texts
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 14 g/10min ASTM D 1238
Temperature 205 °C -
Load 3.26 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength 46.5 MPa ASTM D 638
Elongation at Break 400 % ASTM D 638
Shore A Hardness 80 - ASTM D 2240
Other propertiesValueUnitTest Standard
Water Absorption, Equilibrium 1 % ASTM D 570
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 71.1 - 93.3 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.05 % -
Melt temperature 199 - 221 °C -
Zone 1 149 - 171 °C -
Zone 2 154 - 177 °C -
Zone 3 182 - 204 °C -
Nozzle temperature 188 - 210 °C -
Processing Recommendation ExtrusionValueUnitTest Standard
Pre-drying - Temperature 71.1 - 93.3 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.05 % -
Melt temperature 199 - 221 °C -
Zone 1 149 - 171 °C -
Zone 2 154 - 177 °C -
Zone 3 182 - 204 °C -
Nozzle temperature 188 - 210 °C -
Characteristics
Processing
Injection Molding, Other Extrusion
Delivery form
Pellets
Chemical Resistance
General Chemical Resistance, Environmental Stress Crack Resistance
Certifications
Contains renewable resources, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
Applications
Medical
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.